Interactive Storytelling Chair

I was approached by Callum Egan of Napier University, Edinburgh, to design and make an interactive storytelling chair. It was also to be part memorial for Calum’s late colleague Professor David Benyon who had shared the vision for the chair. It was to be used outdoors for classes in Napier’s Lions’ Gate Interactive Permaculture Gardens. After discussing ideas we decided on the chair having decoration to represent both circuit board technology and elements from nature.

storytelling chair, oak chair, recycled copper, interactive chair, reclaimed oak, recycled brass, reclaimed teak, memorial chair,

Decoration

storytelling chair, chair back, teak leaves, reclaimed teak, recycled brass, recycled copper, oak chair, Scottish oak

I used stainless steel rods, recycled copper nails, recycled brass and copper pipe to form a circuit board pattern. This gradually morphed into a plant like layout. I polished all the copper and brass before fitting the shapes to the back. I left the metal bare so the pieces would change colour over time due to verdigris. The larger leaves were made from reclaimed teak wood which originally came from lecture theatres at Edinburgh University’s Appleton Tower. These were then laser etched with the commemoration and motto “Hasten Slowly”.

I made the chair itself from locally sourced oak and some reclaimed oak from the door to a Victorian walled garden. I was replacing the door as part of another project. The wood had a lovely grey weathered appearance and looked ancient, which had been part of the initial brief. I gave the completed throne several coats of teak oil to waterproof it. This finish can be reapplied easily without having to sand the wood.

I hollowed out two sections of burr wood so there was space to fit Bluetooth speakers inside. These were then fitted to the chair back. The burrs are removable so the speaker batteries can be recharged. The burrs were located about head height when seated. Perfect for the interactive storytelling chair to speak to the person sitting on it! Ideas and talks on sustainability and permaculture can now be delivered by the chair itself or from a seated lecturer or guest speaker.

storytelling chair, memorial chair, interactive chair, reclaimed oak, local oak, Scottish oak, recycled copper, recycled brass, reclaimed teak, repurposed,

Scotland’s Finest Woods Awards 2019

New Trophies

This year both Scottish Forestry and Scottish Woodlands Ltd commissioned me to make new trophies for Scotlands Finest Woods Awards 2019.

The awards ceremony took place on 21st June 2019, at the Royal Highland Showground, Ingliston. See www.sfwa.co.uk for details of the presentation and the other categories and winners.

1919 Forestry Act Centenary Award

custom made trophy, custom designed trophy, native woods,bespoke award, Scottish wood,
1919 Forestry Act Centenary Award

I made this trophy from some of the many different woods grown by Scottish Forestry, who commissioned this trophy. These include larch, red pine, silver birch, elm, ash and oak. I gave this trophy two coats of Danish oil which brought out the colours, then a satin lacquer finish gave it a nice sheen.

bespoke, custom, trophy, sfwa 2019, unique award,
Scotland’s Finest Woods Awards 2019 – © Julie Broadfoot / Juliebee – www.juliebee.co.uk

Forestry and Land Scotland North Region team for Fort Augustus Woodlands won the trophy which was presented by Fergus Ewing MSP.

Farm Woodland Award

custom made trophy, bespoke trophy, custom designed , oak, maple, laser etched images, Scottish,
Farm Woodland Award, Scottish Woodlands Ltd Trophy for Young People

Scottish Woodlands Ltd gave me a rough sketch of the trophy they wanted and I worked on the design.

The circular saw blade on this trophy is made from laminated maple. Jane at laserflair.co.uk did the laser etching of the trees, animals and the Scottish Woodlands Ltd logo using the image jpegs which I supplied. I made the rest of the trophy in oak, with hand turned thistle decorations on the top. Satin lacquer finished things off. I fitted the solid brass plates which have enough space for the trophy to be won and engraved for several years to come.

custom, bespoke, unique award, sfwa 2019, Scottish , native woods,
Scotland’s Finest Woods Awards 2019 – © Julie Broadfoot / Juliebee – www.juliebee.co.uk

Lynn Cassells and Sandra Baer for Lynbreck Croft, Grantown on Spey won the trophy and Fergus Ewing MSP made the presentation.

Congratulations to all the winners !

If you are looking for a custom trophy for a presentation please get in touch. I am happy to discuss your ideas and design something special for you. Here are some other examples.

Bespoke Gate Post Caps

These two bespoke gate post caps were designed to fit on the driveway gateposts of a customer last year. He is an author and a bee keeper, hence the carved motifs. They are  hand carved from locally sourced wood and each made from a single piece of oak.

You can see more newel caps here and I can make them to your design and dimensions.

The client was very specific about the species of bee that he wanted me to carve on the book. It had to be apis melliferaI had to do some research before carving, so I could get the shape of the body correct. Oddly enough, at the time of carving we discovered a small colony of miner bees in the garden, which led us to try and see how many different types of bee we could spot. 

Luckily for my gate post caps project the design for the green man carving was easier. I did look at a few different styles though, and gave the client a sketch of each. The scale of the book limited the detail I could carve, so the green man had to be relatively simple. Sometime I would like to carve a much bigger and more detailed green man, with more leaves.

Pictish Carvings

 Pictish carvings have always interested me…

Pictish carvings, hand carved, elm ,oak, Pictish, Scottish, pictish symbol, crescent and v-rod,bespoke, custom made,
Crescent and V-rod

Pictish carvings have always interested me, so earlier this year I carved some Pictish symbols in the style of  pre-Christian Class 1 stone carvings. The designs of the carvings were simply hand carved, or incised into the wood, in this case Wych Elm, with an oak base. The stones themselves usually have pairs of symbols together, and Class 1 stones are possibly re-used earlier standing stones.

I carved each symbol onto individual pieces of wood, rather than have them in pairs, which was quite common.  I would like to explore the different styles of these carvings further. The later stones  included borders, patterns and figures, as well as the symbols.

The mystery of the Picts

Although the meanings of the carvings are unknown, they are one of the earliest symbols of a cultural identity found uniquely in Scotland.

pictish carving, pictish symbols, carving, picts, Scottish,
Carved stone at Aberlemno, showing three symbols

Pictavia near Brechin and the Groam Museum in Rosemarkie are two great places to see original Pictish carvings and designs.

Of coarse, stones can still be seen at their original locations, like Aberlemno in Angus. Here, there are symbol stones and a Christian cross with symbols and a battle scene.

I think they are great places to visit and see these unique Pictish carved symbols.

Bannockburn Commemoration Carving

2014 is the 800th anniversary of the Battle of Bannockburn, a significant event in Scottish history, which inspired my carving

Commemoration of Battle of Bannockburn, 800th anniversary, Robert the Bruce, 1314,

Statue of Robert the Bruce, at Bannockburn

I was interested to find out if any of my ancestors had played a part in the battle, or the Wars of Independence in general. I started some simple research into my surname, Fyffe, which I already knew to be a part of Clan MacDuff.

In medieval times the head of Clan MacDuff was also the Earl of Fife. He was of ancient Celtic lineage with noble rights and duties, one of which was the honour of crowning the King of Scotland.

Duncan (III) MacDuff, the 11th Earl of Fife, was one of William Wallaces four leaders at the Battle of Falkirk in 1298. He was killed in the battle.

Duncan (IV) , the 12th Earl of Fife, was still a minor in 1314 and a prisoner under the tutelage of Edward I of England. Therefore he took no part in the Battle of Bannockburn. His two brothers , however, fought on. His sister, Isabella, crowned Robert the Bruce King of Scotland.

In November 1314 the English released Duncan (IV) . He immediately affirmed his allegiance to King Robert the Bruce.  In 1320 Duncan (IV) was first in the list of signatories of the Declaration of Arbroath.  I also discovered that the shield of Clan MacDuff and the Earl of Fife was a red lion rampant, on a gold background, similar to the ‘Scottish Royal Standard’ but without the red lined border.

A personal commemoration – a carving

A plan was beginning to form in my mind as to how I could make  a personal commemoration of the Battle of Bannockburn.MacDuff, Bannockburn anniversary, oak, carved, ancestry, Lion Rampant, Scotland, 1314, shield, clan, Earls of Fife,

By chance we were driving from Perth to Dunfermline via Oakley, on the Balgonar road into Saline. I  visited Scottish Wood for materials for a project I was working on.  It was a clear sunny day. From the hill road we could see Stirling and the Wallace Monument in the distance.  I thought of the Men of Fife making their way to battle and remembered my plan.

MacDuff Shield in progress, oak,hand carved,

MacDuff Shield in progress

At the timber yard I bought some oak boards for various carving projects. The oak came from the surrounding area in Fife. Nearby was  the ruin of MacDuff Castle, burned down by Edward I in 1306.

I decided my carving was to be the shield of Clan MacDuff and the old Earls of Fife.  How perfect for it to be carved from oak sourced near to MacDuff Castle, in Fife, by a modern member of Clan MacDuff.  I hope the ancestors smile and look kindly on my efforts. They fought and died for Independence. We only have to vote for it.

Bannockburn Anniversary, 1314, Scottish, oak, carved, Lion Rampant, MacDuff, shield, ,bespoke carving, custom carving,

MacDuff Shield, in full colour.

Nature of Scotland Awards 2013

designed, hand-made, bespoke, RSPB, sycamore, elm, Scotland, made in Scotland, awards, sculpture,

After all the hard work of the many conservation project teams nominated for the trophies, the ceremony for the Nature of Scotland Awards 2013 finally took place. The winners were announced  on 30th October  at the Sheraton Hotel, Edinburgh.  My involvement had been to design and make the actual trophies.

The brief had been to use sustainably sourced local timber. I chose to use Scottish elm and sycamore. The trophy  recipients details were all engraved directly onto the wood bases. The titles of the  award categories and the sponsors names were also engraved. The wood was then given an oil and lacquer finish, which felt good to the touch and was durable.

The Nature of Scotland Awards Ceremony

We were invited to the presentation ceremony where we had a lovely evening. It was great to finally see and meet some of the nominees whose names were engraved on the trophies, together with the RSPB team and volunteers, who had commissioned my work.      A more detailed report on the event and winners can be found here.

Nature of Scotland Awards 2013, elm, sycamore, Scottish, sustainable, hand made, bespoke, custom made,award design,

Nature of Scotland Awards 2013

 

A Cricket Ball

 A recent Commission

laburnum, hand carved, woodturning, cricket ball, trophy, award,
Laburnum Cricket Ball

A recent commission was a cricket ball and base, both decorative.  It involved both wood turning and carving. Turning for the shape of the ball and the base, and carving the detail on the ball – 6 rows of stitching!  It is a copy of a 1937 match ball. This one is turned from Laburnum although Oak or a fruitwood would also work well.  It was made for a private client but I have put the image into the Trophies Gallery as it could be an excellent trophy or award for a cricket team or individual player.

Replacement Spindles

New Spindles in Victorian style

spindles, reclaimed, pitch-pine
Spindles, reclaimed pitch-pine

I hand turned these replacement spindles in reclaimed pitch pine to match an original Victorian pattern for a clients house extension.  The spindles are a good example of the type of architectural woodturning I often get asked to do. Once I have  finished turning them I parcel them up and send them out. The client can then complete another stage in their building  project.

I used very well seasoned pitch pine which was a perfect match for the original wood. The pine was reclaimed from 200 year old beams salvaged from a demolished mill in the Scottish Border town of Hawick. The client gave me an original spindle  to use as the template. Once I turned the spindles I gave them a thin coat of lacquer to seal them. It won’t take long before the colour blends nicely with the original staircase in the clients house.

I can also make replacement spindles like this in Scots pine, oak, Douglas fir, mahogany or another timber to suit the client.

See more examples in Newel Posts

Spindles can come in many different styles, from plain square shaped ones to ornate rope twist shapes. You can finish them with oil, lacquer or wax. All protect the wood.

Presentation gift

Special presentation gift

The presentation gift of this bespoke Drum Table was made by the Regimental Sergeant Major and Warrant Officers’ and Sergeants’ Mess, 1 Scots. to Lt. Col. B. Wrench of The Royal Scots Borderers on 4th July 2013.

Presentation Drum Table, trophies, military presentation, bespoke, custom made, Scottish, repurposed drum,floor lamp,
Presentation Drum Table

The Warrant Officers’ and Sergeants’ Mess commissioned me to make the floor lamp. I had to make alterations to the side drum and fit the engraved glass “drumskin”. An unusual project and not as straight forward as it appears, as it was slightly oval. The LED light inside the drum illuminates the “skin”. It shows up the commemorative dedication and the badge of the Royal Scots Borderers on the engraved glass very well. I used an LED bulb as it would not create the same build up of heat as a more traditional bulb.

I fitted the drum shell on a base of Sapele wood, which raises it from the floor and allows the electric cable a bit of movement. A floor switch makes turning the lamp on and off very easy. There is more than enough room on the glass table top for a couple of drams. Cheers!

The Royal Scots Borderers Pipe band have taken part in the Royal Edinburgh Military Tattoo.

See more presentation gift ideas in Trophies